Page not found

Newly designed adjustable blue LED upgrade kit for the Pioneer SG-9800/SG-9 110V

$69.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store kj1960
(2322) 100.0%,

Location: Seminole, Florida
Ships to: US,
Item: 156075086291

All returns accepted:ReturnsNotAccepted

Normal 0 false false false EN-US X-NONE X-NONE Up for sale – newly designed adjustable blue LED (other colors available, see note below) upgrade kit for the Pioneer SG-9800/SG-9 graphic equalizer. Give your equalizer that beautiful adjustable LED look. Wide brightness adjustment range. This item works only on SG-9800/SG-9 equalizers that are set to operate at 110/120V. See my other listings for my 220/240V version of this item. Check out these SG-9800 blue LED videos from Bigg Matt – Reel-To-Reel expert! https://www.youtube.com/watch?v=2kFiQB3pzZM https://www.youtube.com/watch?v=aEXyFLA1sSw https://www.youtube.com/watch?v=hpcbNKb9BAE Here is recent feedback from eBay customers: Get It, Get It, Get It !!!!!, shipped very fast, very well packed, easy install, only had to remove top cover, 5 solder points (easy access), and a utility knife to break two traces. Very well written instructions with pictures too. Also could be reversed by repairing the two traces. Finally a BLUE SG-9800, so happy, Thank You so very much The item arrived as scheduled. The instructions were clear and easy to follow. I did need some help and Kurt was extremely helpful. This EQ upgrade works perfectly. Would recommend it to anyone. I just wanted to say thanks for designing such a good circuit. It didn’t take me too long thanks to the comprehensive instructions. I enjoyed this project and I’m pleased with the result. Excellent product, it changed the look of my pioneer SG-9800, I’m very happy with this upgrade thank you ++++++++++++++++++++++++++++++++++++++++++++++ Works great, easy to install. Thanks Kurt.If any off you guys are considering buying this kit all I can tell you is buy the sucker. I just installed mine, the directions are a snap and if you do need help, Kurt sends contact information with the directions. The blue LEDs look awesome and matches all my other units. Do yourself a favor and get the kit….you’ll love it. If any off you guys are considering buying this kit all I can tell you is buy the sucker. I just installed mine, the directions are a snap and if you do need help, Kurt sends his email address with the directions. The blue lights [LEDs] look awesome and match all my other units. Do yourself a favor and get the kit….you’ll love it also… thanks Kurt. THE ITEM WAS EVERYTHING AND MORE. IT WAS WELL THOUGHT OUT AND BUILT AWESOME. KURT YOU DO GREAT WORK. I GOT BOTH KITS 9:30 THIS SATURDAY MORNING. I’LL BE INSTALLING IT IN THE AM AND SHALL LEAVE MORE GREAT THOUGHTS ON THIS PRODUCT THANK YOU KURT A VERY SATISFIED CUSTOMER Only the items in the second and third pictures are included in this listing. Everything else pictured is shown for reference only. Item may vary in appearance from that pictured. Mounting bracket color and material may vary. This kit includes the following items to upgrade your SG-9800/SG-9 equalizer to blue (or Green/Yellow/Red) LEDs with adjustable brightness: Circuit board assembly designed to drive the blue (or Green/Yellow/Red) LEDs 24 rectangular LEDs to replace the rectangular red LEDs Potentiometer mounting hole location template Solder Detailed installation instructions Easy installation with the following installation requirements: 5 easily accessible solder connections 2 easily accessible circuit board trace cuts 1 hole to drill in rear panel (optional – if rear panel access of the brightness control is desired). Tools required: Basic hand tools (not included) Soldering iron (not included) Drill and 9/32” (7mm) drill bit (optional – if rear panel access of brightness control is desired) (not included) Note: This kit converts the 24 rectangular red LEDs (12 left and 12 right) inside the equalizer band control knobs to adjustable blue (or Green/Yellow/Red) LEDs. Installation of this kit will NOT change the color of other indicator lights. Note: Other colors LEDs are available (Green, Yellow and Red). If you want one of these optional colors, please specify when you place the order for this item. If no color is specified, the BLUE LED kit will be shipped. It is important to specify the LED color desired if Blue is not desired. The Blue LED assembly is not compatible with the Green/Yellow/Red LED assembly. Note: The potentiometer mounting location for this kit differs from where Bigg Matt mounted his potentiometer. Only the items in the second and third pictures are included in this listing. Everything else pictured is shown for reference only. Thanks for looking and if you have any questions, just ask! Shipping quoted for US48 ONLY. Shipping method may vary. I use eBay’s Global Shipping service for all shipments outside the USA.

Frequently Asked Questions About Newly designed adjustable blue LED upgrade kit for the Pioneer SG-9800/SG-9 110V in My Website

dsksols.com is the best online shopping platform where you can buy Newly designed adjustable blue LED upgrade kit for the Pioneer SG-9800/SG-9 110V from renowned brand(s). dsksols.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Newly designed adjustable blue LED upgrade kit for the Pioneer SG-9800/SG-9 110V on dsksols.com?